Smart lock on a front door controlled from a phone app

Home Services Smart Home Installation

Repairs & Small Jobs

Smart Home
Device Installation

Wired doorbells, cameras on real power, switches that need a neutral wire. The hardwired part done right, and the app paired before we leave.

Licensed, Bonded & Insured

15+ Years Experience

5★ Rated Crew

Upfront Pricing

Book Online (206) 486-6373

Book online

Are We in Your Area?

Enter your ZIP code. If we serve it, you pick the service and a time. It takes about a minute.

A technician reaches out within 1 business hour
Exact price upfront. You approve it first
We answer 24/7 for emergencies

Prefer to talk? (206) 486-6373

Most smart home devices fail at the wiring, not the app: a smart doorbell needs a 16 to 24 volt transformer with enough capacity, a smart switch needs a neutral wire in the box, and a camera or floodlight needs a proper outdoor box on a protected circuit. A licensed electrician installs the device, upgrades the transformer or adds the neutral where needed, and pairs it to your phone — about an hour per device.

Covington, Kent, Maple Valley, Auburn, Renton, Federal Way, Tacoma, Puyallup & nearby

The Work

What We Install

Any brand. Hardwired, not battery.

Video doorbell mounted beside a front door

Smart Doorbells

Ring, Nest, Eufy, Arlo — wired

Smart switch panel on a wall beside a door

Smart Switches

Neutral added when the box has none

Smart Dimmers

Matched to your LED bulbs

Outdoor security camera mounted on a wall

Cameras on Power

No batteries to climb up and charge

Security light lighting up a wall at night

Smart Floodlights

Camera floodlights on the existing fixture box

Smart Outlets

For lamps, heaters, holiday lights

Garage Door Controllers

Outlet and sensor wiring

Smart speaker next to a phone running its app

App Pairing

Working on your phone before we go

What We Find

Why the DIY Install Did Not Work

Doorbell keeps going offline

The transformer is too small. Most 1990s doorbells run a 10 VA transformer; a video doorbell wants 30 VA. We swap it.

No neutral wire in the switch box

Older homes ran the switch loop without one. We pull a neutral or fit a switch designed to work without it.

LEDs flicker on the smart dimmer

Dimmer and bulbs do not match. We fit a dimmer rated for your bulbs or change the bulbs.

Camera on an indoor cord through the window

Not safe and not weather-rated. We give it an outdoor-rated box and a GFCI-protected circuit.

3-way switches

Smart 3-way needs a matching companion switch and the right wire in each box. We sort out which box has the line.

1960s–70s homes

Aluminum wiring and two-wire switch loops. Both are workable, both need an electrician rather than a kit.

Our Process

How It Works

Same three steps, every job.

Book or Call

Pick the job online or call (206) 486-6373. A technician reaches out within 1 business hour to confirm a window.

Exact Price First

We find the fault, explain it, and give you the exact price. Nothing starts until you approve it.

Fixed & Tested

Repaired, tested under load, permit pulled where required, area cleaned. Most jobs done in one visit.

Why Next Phase

Small Jobs, Taken Seriously

A dead outlet gets the same licensed electrician and the same code as a panel upgrade. Bad connections are how house fires start.

Licensed, Bonded & Insured
Washington-licensed electricians. Permits pulled and inspections passed where the work needs one.
15+ Years in Homes Like Yours
2,500+ homes across South King and Pierce County. We have seen your panel before.
Exact Price Upfront
You approve the price before any work starts. If we find more, we stop and ask.
Background-Checked Crew
Every technician is background-checked before stepping into your home. Shoe covers, drop cloths, clean exit.
Satisfaction Guarantee
Anything off, we make it right. We answer 24/7 and real emergencies go first.

15+

Years Experience

2,500+

Homes Served

5★

Rated Crew

Same Day

Service Available

FAQ

Common Questions

Yes. Bring whatever you chose. If it needs more transformer, a neutral wire or an outdoor box, we tell you before we start.

Yes. Either we pull a neutral from the nearest source, or we fit one of the smart switches designed to work without a neutral. The second is cheaper; the first is better for multi-gang boxes.

We pair the device to your phone and show it working before we leave. Account setup on your side takes a couple of minutes; the wiring is the part people get stuck on.

We can extend a circuit to an outdoor box or install a new outdoor outlet on a GFCI-protected circuit. It costs more than a battery camera and you never climb a ladder to charge it.

Swapping a switch, dimmer or doorbell does not. Adding a new outdoor circuit or outlet for a camera does, and we include it.

Where We Work

South King & Pierce County

King County

Covington ★ Kent Maple Valley Black Diamond Auburn Enumclaw Renton Federal Way Des Moines Burien SeaTac Tukwila South Seattle Issaquah Newcastle Snoqualmie North Bend Pacific Algona

Pierce County

Tacoma Puyallup Bonney Lake Lake Tapps Sumner Lakewood Orting Buckley Graham Spanaway

Smart Home
Device Installation

Are We in Your Area?